डाउनलोड PilferShush Jammer - v4.5.0

कृपया डाउनलोड करें और साझा करें PilferShush Jammer - v4.5.0, श्रेणी टूल में चित्रित ऐप्स में से एक।
>प्लस, कुछ अन्य ऐप्स जिसे आप Turbo VPN v3.7.4 APK + MOD (Real VIP/Premium) MOD APK, SWAP - No ROOT, DroidCam - Webcam for PC, Hotspot Shield Free VPN Proxy & Secure VPN, Aim Tool for 8 Ball Pool, KUTO VPN - A free, fast, secure VPN के रूप में डाउनलोड कर सकते हैं। यदि आप PilferShush Jammer - v4.5.0 से संतुष्ट महसूस करते हैं।

Cityfreqs द्वारा जारी, PilferShush Jammer - v4.5.0 आज उपलब्ध सर्वोत्तम और सर्वश्रेष्ठ मोबाइल फोन अनुप्रयोगों में से एक है। ऐप स्टोर के टूल श्रेणी में स्थित है।

PilferShush Jammer - v4.5.0 के लिए न्यूनतम ऑपरेटिंग सिस्टम Android 4.3+ और ऊपर है। इसलिए यदि आपको पहले से नहीं है तो आपको अपना फोन अपडेट करना होगा।

एपीकेड्रोइड पर, आपको PilferShush Jammer - v4.5.0 APK मुफ्त डाउनलोड मिलेगा, नवीनतम संस्करण 4.5.0, प्रकाशन की तारीख 2020-10-10 होने के साथ, फ़ाइल का आकार 2.7 MB है।Google Play Store के आंकड़ों के अनुसार, लगभग 1000 डाउनलोड हैं। यदि आप चाहें तो एंड्रॉइड पर व्यक्तिगत रूप से डाउनलोड या इंस्टॉल किए गए ऐप हो सकते हैं। अपने ऐप्स को भी अपडेट करें। आपको नवीनतम सुविधाओं तक पहुंच प्रदान करता है और सुरक्षा में सुधार करता है। और एप्लिकेशन की स्थिरता। अब यह आनंद लें !!!

PilferShush Jammer blocks other apps attempting to utilise the microphone without your knowledge. Some apps use hidden processes to record tracking audio in the background that is either generated by nearby beacons, television commercials, streamed music services or websites. This tracking audio is transmitted between 18 kHz and 22 kHz (near ultra high frequency) which is beyond the range of typical human hearing but within the recording range of a typical Android phone.

To block unwanted use of the microphone by hidden app processes, PilferShush Jammer requests use of the hardware microphone from the Android system and holds it. This technique locks up the microphone from any other apps attempting to gain access to it. This technique has been tested only on user apps, not system apps. The Android system should halt PilferShush Jammer from blocking the microphone whenever a phone call is received or made.

When the jamming technique is running and the microphone is locked up, PilferShush Jammer posts a notification to keep the user informed that it is running. Tests have shown that it uses 0% CPU, 0% network and 43.6mb RAM when running for over an hour.

This is an experimental app made as part of research into audio counter-surveillance methods within the Android and IoT world.

It requires RECORD_AUDIO permission so that it may access and lock up the microphone.

It does NOT record or listen to any audio.
It does NOT connect to the internet.

Version 2.0 Active Jammer addition:

Tones can be emitted with a carrier frequency and a drift limit with rate all constrained to NUHF of 18 kHz to 24 kHz depending on the device capabilities. For instance 20000 Hz carrier, drift limit 1000 Hz and rate slow - will output random frequency between 19 kHz and 21 kHz approximately every second.

Version 3.0 Jammers run as a service:

Both the active and passive jammers now run as a (foreground) service that should accurately indicate whether they are running or not. This is dependent on both the Android OS (power management) and any App Managers that may destroy running services.

As this app seeks to block microphone use it is important to NOT dismiss or hide the notification otherwise you may forget it is running.

Also includes a scanner to check user installed apps for NUHF and Audio Content Recognition (ACR) SDKs as well as any services or receivers.

Version 4.0 Redesign
Major overhaul of the design to make information clearer and to simplify typical uses of the app

Notes:
The next release will investigate removing the audible artifacts (popping and clicking) present during the active jamming tones.

White noise output may not be very effective at blocking and is a somewhat annoying sound.

The speaker output may not have enough amplitude to block unwanted NUHF signals - testing will determine.


Source code is available here: https://github.com/kaputnikGo/PilferShushJammer
Research and Project webpage : https://www.cityfreqs.com.au/pilfer.php

- added passive control appwidget for Android 11- add boot receiver- updates to Spanish translation- microphone info- API check for requestAudioFocus check method- Inspector Fragment has mic info check print- remove Color.Accent resource need- add ActiveJammer shadow method- removed click artifacts from NUHF tone active jamming- add sine/sqr/saw waveforms- config optional AudioFX equaliser to NUHF preset